
Add to Cart
* Support EPON/GPON mode and switch mode automatically
* Support Route mode for PPPoE/DHCP/Static IP and Bridge mode
* Support IPv4 and IPv6 dual mode
* Support 2.4G WIFI and Multiple SSID
* Support LAN IP and DHCP Server configuration
* Support Port Mapping and Loop-Detect
* Support Firewall function and ACL function
* Support IGMP Snooping/Proxy multicast feature
* Support TR069 remote configuration and maintenance
* Specialized design for system breakdown prevention to maintain stable system
Technical item
|
Details
|
PON Interface
|
1 GPON BOB (Bosa on Board)
|
Receiving sensitivity: ≤-28dBm
|
|
Transmitting optical power: +1~+4dBm
|
|
Transmission distance: 20KM
|
|
Wavelength
|
TX: 1310nm, RX: 1490nm
|
Optical Interface
|
SC/UPC Connector
|
Design Scheme
|
RTL9603C+RTL8192FR BOB(RTL8290B)
|
Chip Spec
|
CPU 950MHz,DDR2 128MB
|
Flash
|
SPI Nor Flash 16MB
|
LAN Interface
|
1 x 10/100/1000Mbps(GE) and 3 x 10/100Mbps(FE) auto adaptive Ethernet interfaces. Full/Half, RJ45 connector
|
Wireless
|
Compliant with IEEE802.11b/g/n,
|
Operating frequency: 2.400-2.4835GHz
|
|
support MIMO, rate up to 300Mbps,
|
|
2T2R,2 external antenna 5dBi,
|
|
Support: Multiple SSID
|
|
Channel: Auto
|
|
Modulation type: DSSS, CCK and OFDM
|
|
Encoding scheme: BPSK, QPSK, 16QAM and 64QAM
|
|
LED
|
9 LED, For Status of WIFI,WPS,PWR,LOS,PON,LAN1~LAN4
|
Push-Button
|
3,For Function of Reset, WLAN, WPS
|
Operating Condition
|
Temperature: 0℃~+50℃
|
Humidity: 10%~90%(non-condensing)
|
|
Storing Condition
|
Temperature: -30℃~+60℃
|
Humidity: 10%~90%(non-condensing)
|
|
Power Supply
|
DC 12V/1A
|
Power Consumption
|
≤6W
|
Dimension
|
155mm×92mm×34mm(L×W×H)
|
Net Weight
|
0.24Kg
|
Pilot Lamp
|
Status
|
Description
|
WIFI
|
On
|
The WIFI interface is up.
|
Blink
|
The WIFI interface is sending or/and receiving data (ACT).
|
|
Off
|
The WIFI interface is down.
|
|
WPS
|
Blink
|
The WIFI interface is securely establishing a connection.
|
Off
|
The WIFI interface does not establish a secure connection.
|
|
PWR
|
On
|
The device is powered up.
|
Off
|
The device is powered down.
|
|
LOS
|
Blink
|
The device doses not receive optical signals or with low signals.
|
Off
|
The device has received optical signal.
|
|
PON
|
On
|
The device has registered to the PON system.
|
Blink
|
The device is registering the PON system.
|
|
Off
|
The device registration is incorrect.
|
|
LAN1~LAN4
|
On
|
Port (LANx) is connected properly (LINK).
|
Blink
|
Port (LANx) is sending or/and receiving data (ACT).
|
|
Off
|
Port (LANx) connection exception or not connected.
|